Where to got BMW Important Programmer for BMW F series key programming

Where to got BMW Important Programmer for BMW F series key programming

CGDI BMW important programmer operate for BMW F serail essential prgramming, how you can got the CGDI BMW F serial key programming database? Here Obd2tool.com share a piece of free CGDI BMW F series programming database download as following.

CGDI BMW: BMW F series programming database download:

https://pan.baidu.com/s/1FKhet-BA3bj7etRwIg7riw (Buyer order CGDI BMW form Obd2tool.com, just keep order number to get in touch with email: sales@obd2tool.com to got password)

1.Just after you total download, the file is like this:

This folder consists of these files shown as below.

3.Appropriate click the CGDI icon on the desktop, choose the alternative “Open the location of your folder”.

4.Copy or cut the folder ” psdzdata” and paste it in to the category. Now you might be ready to use F series programming functions.

Please enjoy!

CGDI BMW Important key programmer BMW F series programming feedback:

1.Plan F30 326 2013 FEM smart key…OK
2.system F31 smart important FEM…OK

More…

1.CGDI PROG bmw f20 2014 mileage reset OK
two.read ISN DME MSD80 OK 5WK93628
3.the CAS Plug from BMW Multi Tool will perform with CGDI, because CAS and OBD connector are BMW standard protocol.

Any have to have for CGDI Prog BMW MSV80 important programmer or BMW CAS key programmer just speak to us freely.

How to Program BMW F30 FEM Key with CGDI Prog Key Programmer

Here’s the little guide on programming key on a BMW F30 FEM system with CGDI Prog BMW MSV80 Car Key Programmer.

Device required:

CGDI Prog BMW key programmer on OBD2TOOL

BMW FEM/BDC Test Platform for BMW  F20 F30 F35 X5 X6 I3

Preparation:

Disassemble the FEM/BDC module from vehicle

Procedure:

Connect BMW FEM/BDC test platform with CGDI Prog  and FEM/BDC module

Open CGDI Prog BMW software

Select FEM/BDC Key Match

The current FEM BDC needs to update the ECU program before performing key matching. Please ensure that the car battery has enough power supply. Please do not disconnect cable connection during programming procedure.

Please remove the FEM BDC and then use the programmer to read and save the data from the
95xxx EEPROM chip on the FEM/BDC computer board, then click “Next”

Please read the original car EEPROM data

Read eeprom data with programmer, i.e Orange 5 eeprom programmer

and save data

User the programmer to write the calculated new data to the 95xxx eeprom chip, then put the FEM BDC back to the car
click Next

Click OK to write M95128

User the car key programmer to write the calcutaed new data to the 95xxx eeprom chip, then put the FEM BDC back to the car
click Next

Power on BMW FEM BDC test platform

The yellow indicator will flash

Coding is being backed up

The ECU is being programmed

and verify flashing

Program BMW F30 FEM key success