How to Program Car Keys on L322

How do you code a key on a Range Rover L322 vehicle?

Replacing a missing master key is quite expensive. Do not pay the extra cost of ‘Dealer Coding.’ You can do this yourself in two minutes by following the simple process below:

1. Get in and close all doors. Turn ignition on and off quickly and remove the key (all within about 5 seconds).

2. Within 30 seconds of turning the ignition off, while holding down the ‘unlock’ button, press the ‘lock’ button three times. Release the ‘unlock’ button. (You may or may not get the confirmation from the door locks.) Holding the key at your head level provides the best results as the key sensor is in the side window pillar.

3. Repeat for each key you want to initialize within 30 seconds after the last one you initialized (if you have Jaguar and Land Rover Diagnostic Tool).

4. After confirming the last key, quickly put the key back in the ignition and turn it on/off again to finalize.