Xentry error 2221-45 No access authorization solution

  • -

Xentry error 2221-45 No access authorization solution

One of customer had the Xentry error 2221-45 No access authorization when running Mercedes MB SD Connect C4
2016.07V Xentry diagnostic software. Here is the final solution provided by mbstarhsop.com engineer.

Problem:

(2221-45) No access authorization for XENTRY Diagnostic was found on the server. You must contact the User Help Disk.

xentry-2221-45-error

Solution I from mbstarshop engineer:

If you running Windows 7 hard drive, then

Browse to C:\Mercedes-Benz\Xentry\fusoko\eclipse\plugins, delete com.daimler_xentry.diagservice_1.6_0.2016.07181047 file.

xentry-2221-45-solution
2. If you running Windows 8 hard drive,then

Browse to C:\Program Files\Mercedes-Benz\Xentry\fusoko\eclipse\plugins folder,
Delete com.daimler.xentry.diagservice_1.6.0.201607151427 file

xentry-2221-45-win8-solution
Problem has been solved.

Solution II from a user

Software version: Xentry 2016.05

In folder
C:\Program Files (x86)\Mercedes-Benz\Xentry\fusoko\eclipse\plugins

Rename
com.daimler.xentry.diagservice_1.6.0.201603141505.jar
to
com.daimler.xentry.diagservice_1.6.0.201603141505.jarold

Then paste in
com.daimler.xentry.diagservice_1.6.0.201603141505.jar
from 2221 052016 folder

Solution III from another user

Software version: 05.2016 Xentry

Free download Xentry-2221-45-fix.rar:

https://mega.nz/#!Ip1GkQhR!hHakXl1U1Q5SEE_5NlIZcfSNRE_2CKDJSL9OLXTexYw

(2 fix)

Solution IV with lots of thanks & likes in a forum

Software version: Xentry 2016.5

replace the file call com.daimler.xentry.diagservice_1.6.0.201605121225.jar in the folder
c:\program Files(x86)\Mercedes-Benz\Xentry\fusoko\eclipse\plugins
with the attachment below

2016.05-Xentry-[2221-45]-Fix.rar:

https://mega.nz/#!11kxTZZA!uBWlUVOx7XzWai-T7eSPJt6V_lVhG2Pl5PI02oUNXUM


  • -

W215 2003 K-line diagnosis DTS Monaco or Vediamo

This is for those maybe interested getting DTS 8 or Vediamo v5 working on 2003 Mercedes later.

My configuration:
X230 Lenovo
SD connect C4
No Xentry nor DAS (it seems better to not install this as it can created more probles in test phase)
Just InstallSDconnectToolkit 2.1.30 also have 2.1.14 but not installed (maybe should I use 2.1.14 ? )
and DTS Monaco 8.08.021
IP4 set to 172.29.127.100 255.255.255.0 dns 8.8.8.8

My actual settings:

W215-2003-K-line-diagnosis-DTS-Monaco-or-Vediamo-1
W215-2003-K-line-diagnosis-DTS-Monaco-or-Vediamo-2

Set up 2 computers for testing:

computer 1)  vediamo 4.02.02  on XP Xentry 09.2014
computer 2) DTS 8.08.21 on Windows 7 x32 clean NO Xentry, No Vediamo, with a custom 2.1.7.1 Toolkit and ToolkitApiDll_4.0.dll in sytem32

Vehicle: W215 2003 V12 Biturbo

W215-2003-K-line-diagnosis-DTS-Monaco-or-Vediamo-3

Problem:

I found several source with W215 folder and 1 works, but partially
On the picture you can see, once I apply filter, these are the only few that connect

W215-2003-K-line-diagnosis-DTS-Monaco-or-Vediamo-4

Only these ecus above turn green

other 20-30 not

Solution:

The solution in understanding that in 2003 year where there’s no any Vediamo and DTS8

Free solution is using DAS. It solves 99.99% tasks in this kind of vehicles.
Not free solution use other hardware and software.

W215-2003-K-line-diagnosis-DTS-Monaco-or-Vediamo-5
W215-2003-K-line-diagnosis-DTS-Monaco-or-Vediamo-6

From Vediamo manual:

CaesarGo: This firmware usually runs directly in the non-volatile memory of your CAESAR hardware, e.g., in Part A or Part Y. Supports older communication protocols as well, e.g., KWFB. The new UDS protocol is not supported.
TLSlave: This firmware runs on the computer used. The faster the computer, the quicker the different communication tasks can be completed (e.g., flash processes). Also allows the simultaneous opening of up to 50 CAN channels. This firmware supports “newer” protocols as well, e.g., UDS.

Good to know: CBF files is not about K-Line. CBF file use also W212 for example. Try to use Vediamo 4 for K-Line ecus.

For newbies: if you are not good at DTS or Vediamo settings, you could get a disk that installed all Mercedes software (Xentry/DAS, DTS, Vediamo, EPC, WIS, etc) before delivery. Tested successfully and plug-and-play!

Look here:

W215-2003-K-line-diagnosis-DTS-Monaco-or-Vediamo-7

Chart: explains the reason why many are looking for DTS

W215-2003-K-line-diagnosis-DTS-Monaco-or-Vediamo-8