Mercedes BENZ C5 SD Connect Xentry Tab Kit Technical Support

  • -

Mercedes BENZ C5 SD Connect Xentry Tab Kit Technical Support

Mercedes-BENZ-C5-SD-Connect-Xentry-Tab

Why MB Star Diagnostic tool is so well-received by thousands of users, its technology and quality is developed after lots of experiments and improvement. Recently, we mbstar shop website provide a new Star diagnosis bundle, Mercedes BENZ C5 SD Connect Xentry Tab Kit( Newest Mercedes BENZ Diagnostic Tool;Original second hand Mercedes BENZ C5 SD Connect Xentry Tab Kit;With original software and tablet kit;Support BENZ latest protocol)

BENZ C5 SD Connect Diagnostic Tool on OBD2TOOL Description:
Mercedes Benz C5 Xentry Connect diagnostic interface, produced by French ACTIA Company and equipped with Panasonic Xentry-Tab, can test Engine / Transmission / air conditioning /SRS/ABS/ anti-theft system and OBD-II system.
Benz C5 can provide complete diagnosis for the newest hybrid W222. And it has a qualitative improvement in hardware and software by authorization of diagnostic interface to control the software.
BENZ C5 SD Connect Diagnostic Tool Feature:
Efficient diagnostic program and complete vehicle database
Simple and easy-to-use user interface (UI)
High-performance Tab with 4G memory and 13.3 inch LCD touch screen
Advanced upgraded VCI+ communication inter
Support Wired/ wireless connection
Cover all new Mercedes Benz models.
Professional Diagnostic Tools BENZ C5 SD Connect Diagnostic Tool Configuration parameters
A full set of kit configuration
1.Panasonic newest widescreen tab.
2.The original Xentry-Connect by ACTIA
3.Mercedes Benz OBD2 diagnostic cable
Panasonic widescreen Xentry-Tab technical parameters:

OS: windows 7
ultimate CPU:4G
Hard disk memory: 250G
13.3inch touch screen

Xentry-Connect (VCI+) Technical Parameters:

OS: Windows Embedded Standard 7(32bit)
Processor: ArrandaieCeleron P4500 oder P4505(38W TDP)
Memory: 4G hard disk with 256GB SSD
Display: 128*64 PX
Battery: 40 minutes (When CPU capacity to 60%)
Weight: 1.9KG
Network connection: WLAN : IEEE802.11 a/b/g/n2.4+5GHZ


  • -

How to configure Xentry Connect C5 V09.2017

2017 Xentry Connect C5 user manual: how to configure/set up MB SD Connect C4/C5 to use for the first time

Please have your XENTRY Connect MAC addresses (Wi-fi and LAN) enabled for the workshop network byyour IT supervisor/IT service provider in advance. You can read off theMAC addresses (Wi-fi and LAN) from the stickers on the devices.
26-1

Your case already contains a printed empty network questionnaire.

Please have it filled out by your IT supervisor. Important! Do notcontinue the initial startup until the questionnaire has been filled outcompletely! This will help to avoid additional work.
26-2

The latest Mercedes diagnostic software 09.2017 disk came with your MB SD Connect C5.

You can start the network configuration now.

Completely charge and turn on the XENTRY Connect.

Starting the XENTRY Connect for the first time can take up to 10 minutes.

Configuration can be started whilst both devices are still charging.

Attention! Be sure to use the correct power supply units!

Start the XENTRY Control software using the desktop link on the laptop. ConfigAssist is already open; if not,call up ConfigAssist via the “Configuration” menu.

Note! If you work with static IP addresses, you must perform theconfiguration via the expert dialog and transfer the configuration tothe XENTRY Connect via a USB stick.

26-3
Please have the filled out network questionnaire on hand:

How would you like to configure the devices?

Select one of the 3 options.

Recommended selection: “New without existing configuration data”.

26-4

Please continue following the ConfigAssist dialogs and enter the required

data from the network questionnaire.

Next, switch on the XENTRY Connect. This has already finished installing.
26-5

In the final steps, the configuration is transferred from the laptop to the XENTRY Connect. You will be prompted to interconnectthe devices using the supplied black Ethernet connecting cable.

This cable connection is required only for configuration

If configuration is successful, a green tile with the number of the Benz diagnostic tool XENTRYConnect C5will be displayed. You can now use the devices: Remove theblack Ethernet connecting cable to work via WLAN and with an onlineconnection. Then click on the green tile in order to read out the datafor ordering the StartKey.
26-6

Done!