Here’s the guide to program 3-button remote keys to Subaru Forester 2016 with key chip ID62 (80 bits). The chip and remote control l programming is performed by the Lonsdor K518ISE Key Programmer.
Left: new blank key; Right: original key
Procedure:
Connect K518 host with vehicle via OBD socket
Select Immobilizer->Subaru->Select from type->Immobilizer->Type 6(4D 82G chip)
Check key number
Turn on ignition switch
Lonsdor k518 identified 1 key programmed
Select Add key function
Insert original key and turn on ignition switch
Turn off ignition and then turn on
Key has been programmed
Insert new key, turn on ignition and then turn off
Repeat to program more keys if you need
Programming completed
Check number of keys programmed: 3
Select Program remote function
Turn on ignition
Turn ignition off and remove key
Program all remote keys within 5 sec
Press LOCK and UNLOCK button to program remote control
Repeat procedure to program other remotes
Test the remote controls
Success.