Mercedes S430 ETC SCN coding with SD Connect C4

This is a customer feedback working SCN coding on Mercedes S430 ETC with MB Star diagnostic SD Connect C4 diagnostic system.

Mercedes model:
Mercedes S430 Elongated (220.170)

Device to use:
Dell laptop D630
MB SD Connect C4

11-0

ETC SCN coding procedure:
Open XENTRY

11-01
Enter user ID and password to log in.

11-1

Communication with control unit EGS2…

11-2

Data are being determined…
The coding is carried out…

11-3

Data are being determined…
Wait 3 seconds…

11-4

Switch ignition off

11-5

Wait 5 seconds…
Switch on ignition
Control module reset, please wait…
CVN The value is calculated internally by the control unit
Wait 100 seconds…

11-6

Data are being determined…
Documentation for repair order WDBNG70J25A457136
The SCN coding sequence has been completed successfully.

11-7

Click YES to close the file without making a printout.
Data are being determined…
Communication with control unit ETC…

11-8

Go to SCN coding

11-9

Select Fault codes

11-10

No fault code present

11-11