FAQ VXDIAG Multi Tool for Full Brands

  • -

FAQ VXDIAG Multi Tool for Full Brands

FAQ of VXDIAG multi tool for Full Brands including JLR / HONDA / GM / VW / FORD / MAZDA / TOYOTA / PIWIS / Subaru / VOLVO / BMW / BENZ in 2TB HDD format.

Q: What is the default wireless password of vxdiag full?

A: 12345678

Q: Hello, I wonder what is included in the full set package?

A: VXDIAG Full set includes the vxdiag vcx plus machine, cables, 2TB software hard disk (with 12 brand software), and a laptop t410.

Q: I would like to know if in general all the programs can be used in Spanish?

A: Most software supports Spanish. BMW software only comes with English and Chinese. GM Tech2win only comes with English.

Q: Is this one come with computer, hdd pre-installed?

A:  Yes, HDD is pre-installed before shipping.

Q: if i have scn xentry account than it will support or not ?
A: Yes, VXDIAG full supports Benz scn coding if you have online account (we don’t provide online account.)

Q: If I buy vxdiag #vx17 for all brands how much updates softwares in future?
A:  For update and update cost, it depends on software. Ford/Mazda IDS, GM GDS2, Honda HDS, TOYOTA Techstream, Volvo Vida, VAG ODIS, Subaru Ssm3 software usually comes free, you can get software link directly if there is newer version available.  For BMW, Xentry, Porsche new update,  you need to buy new software HDD.

Q:  I heard about bmw and mercedes , there no software upgrade public. Pay only get newer software
A: Yes. newer BMW and Benz software can by purchased in HDD format only.

Q: Do I need to install these software one by one?
A: Software comes in HDD format. Software is pre-install and ready to use. Except Benz Xentry which requires activation.
Here’s is a video showing Benz xentry activation procedure.
For other softwares, just select and run after boot up.

vxdiag-hdd

Check: How to start and use VXDIAG Full with 2TB HDD and laptop?

Q: Firmware is upgradeable?
A: Yes, vxdiag full can be updated online.
Check: VXDIAG firmware update guide

Q: If you can send my everything with newest software?
A: Hi, you’ll receive all current latest software (till May 2019) below:
Toyota Techstream  14.00.018
Honda HDS      3.101.011
FORD IDS  112
GM      tech2win 16.02.24, GDS2 2018
VOLVO  VIDA  2014D
JLR SDD      153
VW ODIS      5.0.3
MAZDA IDS   112
Benz  XENTRY  2019.03
BMW   ISTA-D 4.14.14 ISTA-P 3.65.2.000
PORSCHE  PIWIS 18.1

Q: Can I use VXDIAG full brands on a Lenovo 330-15IGM laptop?
A: It works if 1; the laptop supports mechanical hard disk 2; the laptop runs Windows 7 operating system.

Q: Can i add Porsche  piwis3 doip license into the VXDIAG full firmware?
A: Provide us your device serial number to check if it is available. VXDIAG VCX PLUS with Serial Number V71*****   and V83*****  are compatible with Porsche PIWIS3 software.

Q: Does this vxdiag full work on BMW DoIP and Mercedes DoIP models?
A: Yes. vxdiag full supports BMW and Benz DoIP models.

Q: Does this vxdiag full support JLR DoIP vehicles?
A: No, for JLR & Porsche DoIP models, you need JLR VCX DoIP & Porsche PIWIS3 interface.

Q: Recently I purchased the multidiag full brands equipment.

In the laptop that has the hard disk already installed there are many softwares but some softwares are missing.
In particular the brands that are missing are: GM, Ford, Mazda and Honda.

Could you tell me how to download and install the HW?

A: Please drop down the menu and you will see “missing” software. Because all software cannot be displayed on a single interface.


  • -

Reviews about Volvo VIDA 2014D installaing on Windows 10/8/7/XP macOS

Here are all from users answering you guys: What is the best operating system to work with Volvo Vice VIDA 2014D? Windows 10, Win 8, Win 7, Win XP or macOS?

 

Volvo VIDA 2014D on Windows XP

1.I’ve happily be using VIDA on my old Win XP laptop for a few years

 

2.I have an old laptop (currently with Vista) and an old ASUS notebook running XP SP3.

 

3.VIDA 2012, 2013A or D version software should be installed on Win XP or Virtual machine. But 2014A and new 2014D requires Win 7 O/S ONLY. that’s a huge development for VIDA DiCE kit. Leave alone WIN xp or VirtualBox

 

4.I also run my VIDA in a XP virtual machine. No issues with mouse or USB, if you are familiar with VMware.

 

Volvo 2014D VIDA on Windows 7

1.I just went back to a Win7 machine running IE9 and I’m very careful with the updates. 2014D is supposed to work with IE10 but it didn’t when I tried it.

 

2.While it says it works with ALL versions of Windows…it doesn’t actually.

However, it does have a GREAT setup instruction PDF that truly made setting up a VM super easy using Win7 Pro. Which then made setting up VIDA a breeze. I have it up and running and I even managed to connect to my older DICE unit.

 

3.I’’m on 2014d and W7 pro

 

4.I’m lucky in that I had an old laptop lying around that I could use solely for VIDA / DICE. Once I finally got it working (Win Pro 7 32 Bit, .Net 3.5), I turned off windows update, so that its configuration wouldn’t change. I assume that as long as I don’t change my car for a newer one, there is no benefit to an upgraded VIDA version (I’m on 2014D), or any further windows updates.

 

5.I used 32bit Win7 Ultimate. It all works now.

My only issue is my car battery running out being left on pos II for a length of time!

 

6.it must be Win 7 Pro ( or ultimate).

 

7.It won’t work on 7 Home

 

8.Vida 2014d will work fine with a fully updated Windows 7 Pro

 

9.On any 32-bit Windows machine, RAM in excess of 3 GB will be unrecognized by the OS

 

10.I have VIDA 2010D on Windows 7 Home Premium.

 

11.IE 8 and install on Win7.

 

12.VADIS on Win7 x64 with IE8 works like a charm

 

13.I run VIDA 2010D on Windows 7 professional 32-bit with Chrome Version 23.0.1271.97 – No problems

 

You can have VICE VIDA 2014D on Windows 7 with 100% success

 

2014D VIDA DiCE on Windows 8

1.I had it working with Windows 8.1 until an unknown update broke connectivity to DICE and no amount of system restore would bring it back. I guess 2014D works ok, but be aware an update may blow it up in the future.

 

2.DiCE was working with Vida2014B and Windows 8.1, but stopped working when I upgraded to Windows 10 yesterday.

 

3.Need to uninstall the IE existed on the system, (probably IE9) first, then it should be able to install Win 8.

 

4.win8 & ie10 sure don’t play well with anything, can’t downgrade in win8 either, that’s what that compatibility mode is for.

 

Volvo VIDA 2014D on Windows 10

1.Win10 with Vida 2014D and DiCE is now working. And I have connected to a separate ME9 and read some data from it.

 

2.Windows 10 is causing tons of compatibility issues across the board. You may have to VM until updates.

 

3.I have been using 2014D VIDA on my win10 tablet for few months and it even works via integrated Bluetooth!!!

Volvo_副本

 

Volvo VIDA 2014D on Windows Mac

I run mine on a Mac using WinXP + VirtualBox VM without any problems. But UI is a little clunkier with a VM.

 

I have an old Win XP Dell that I use exclusively as a VIDA/DiCE box and I use VMWare Fusion/Win7 VM on a Mac for a VIDA reference source.

 

I have XP pro on my Macbook Pro in VirtualBox and that is working fine.

 

Have a walk through for the Virtual Box

 

Here i would describe details of the system, HD size, Ram amount, processor type, you’ll need to be running in XP virtual nachine, provided you have the size described above plus IE8, you may want to disable your firewall and antivirus during installation. at least 2GB of ram, more than 20GB hard disk, preferably 40GB + , I don’t remember the processor type but mine is pentium 4 quore duo works ok, IE8 when you have those, your installation will be okay.

 

VM Ware player is compatible with Win XP, Vista 32 & 64 bit as well as Win7 32 & 64 bit

 

I have it running on my main PC and it works!