VCDS 18.9 Update for VAG Com Original VCDS 18.9.0 Register Interface

  • -

VCDS 18.9 Update for VAG Com Original VCDS 18.9.0 Register Interface

VCDS 18.9.0 updated, VAG-COM VCDS 18.9.0 version includes support for new 2019 model cars,as well as a number of other enhancements and improvements. VCDS 18.9 can update online directly for who have VCDS 18.2.1 VAG-COM Cable. VCDS 18.9.0 release works with VAG-COM from Obd2tool.com & all genuine Ross-Tech interfaces made since 2004, but support for 2019 model cars requires a current register interface.

VAG-COM-V18.9-VCDS-18.9-2 VAG-COM-V18.9-VCDS-18.9-3

VCDS 18.9 Software Overview:
Software Version: VCDS 18.9
Release VCDS 18.9 operating system: works with Windows 7, 8, and 10 (both 32-bit and 64-bit)
Earlier versions of Windows such as 2000, XP, and Vista might still work, but we no longer consider them supported.
VCDS does not work on “Windows 10 S”, which does not allow software to be installed from any source other than the Microsoft Store. If wish to use VCDS on a computer with this “Student” version of Windows, you’ll need to upgrade it to Windows 10 Pro.
Windows running in a VM (Parallels, Virtual Box, etc) may work but is not supported.
Windows 95, 98, ME, and NT4 definitely will not work.
VCDS Release 18.9 compatible hardware: must be used with a licensed Ross-Tech interface.
That include all genuine HEX-, KEY-, KII-, or Micro-CAN series Interface of interfaces.
It does not work with any third-party interfaces or some of the older “low-tech” interfaces we made and sold before 2004.

Need VCDS 18.9.0 VAG-COM VCDS 18.9 Ross-Tech Register Interface Ross-Tech VCDS genuine interface just contact us freely.


  • -

How do I Register/Activate my VAG-COM software?

8

1 How do I Register/Activate my VAG-COM software?

All of our Current Interfaces have Activation built-in, so VAG-COM should always be Fully Activated once it has been tested on a car. If you have an older Interface without built-in Activation, or have purchased an Interface somewhere other than Ross-Tech, click here for Activation instructions.

2 What’s the difference between the Shareware version and the fully registered version?

All of our Current Interfaces have Activation built-in, so VAG Diagnostic Tool will always be Fully Registered/Activated. If you have an older Interface without built-in Activation, or have purchased an Interface somewhere other than Ross-Tech, VAG-COM will operate in Shareware mode until it is Activated. The differences between Shareware and fully registered/activated versions are listed near the bottom of each function page in the Online Demo / Manual and in the VAG-COM Function Chart.

3 Is Product Support included in the price?

Absolutely. If you have a question or problem, please post it to the VAGCOM 18.2 mailing list, mail it to us directly, or give us a call. However, please understand that we don’t know everything about every VW/Audi/SEAT/Skoda ever made.