skp900 key programmer program Toyota H chip for Toyota Corolla 2015

  • -

skp900 key programmer program Toyota H chip for Toyota Corolla 2015

skp900 key programmer can program Toyota H chip for Toyota Corolla 2015 , we have test it already.

now we show you the steps how the skp900 key programming v5.0 version make a new Toyota Corolla H chip remote key

1

steps 1: SKP900 Toyota H chip Key Programming

Use the original working key to turn on car ignition.

Power on SKP-900 key programmer.

Go to “IMMOBILIZER” then select “TOYOTA”.

2

Choose “SYSTEM TYPE” and “IMMOBILIZER 2”.

3

pelase pay attention to:

Turn ignition on?–Press “YES” button.

Insert the registered main key?– Press “YES” button.

Then use the new key you want to add to turn on car ignition. (The car immobilizer light will keep flashing)

4

5

When the immobilizer light stop flashing and turn off, key programming is successful!

6

7

steps 2: SKP900 obd2 key programmer Toyota H chip Key Match to complete key programming

same procedure to the “SYSTEM TYPE” menu, choose “REMOTE”.

8

Go to “REMOTE SYSTEM 2” then use the original working key to turn ignition on.

Now follow the instruction: open the driver’ side door, press the door unlock button and keep all other doors close.

9

In 30 seconds you should press the new key both LOCK& UNLOCK buttons, then press the UNLOCK button once again.

10

11

12

Skp900 feature
1. skp900 Latest Version: V5.0
2. Support almost all vehicles in the world
3. Don’t need pincode when programming keys for many vehicles
4. Can read pin code for many vehicles, only a few vehicles need to get pincode from other place.
5. No tokens needed. You can program as many cars as you can.
6. Low price to meet the economic crisis, cost-effective.
7. Support TOYOTA G CHIP.
8. Language: English
Original SuperOBD SKP900 key programmer V5.0 OBD2 Car Auto Key Programmer Support Almost All Cars No Tokens Limited Free

 


  • -

How SKP900 Key Programmer add Toyota G chip and H chip key?

This blog is going to show you how to use SuperOBD SKP-900 Key Programmer program Toyota G chip key and Toyota H chip key. This guide is tested on 2015 Toyota Sequoia (G chip) and 2014 Toyota Corolla (H chip). Hope it helps you!

How SKP-900 Key Programmer program Toyota G chip key?

http://forobd2tool.com/wp-content/uploads/2017/07/5/15-1.jpg

First, start SKP900 and select “Immobilizer” function

http://forobd2tool.com/wp-content/uploads/2017/07/5/15-2.jpg

Choose “Toyota” then “Immobilizer 2”

http://forobd2tool.com/wp-content/uploads/2017/07/5/15-3.jpg
It will show “Choose OBD2 adapter, turn ignition on”, then turn ignition on with the original key. Press Enter button and wait for it is communicating.

http://forobd2tool.com/wp-content/uploads/2017/07/5/15-4.jpg

Next, select “Add Key” then it will show “Insert the registered key and turn ignition on”, press the Enter button to continue.

http://forobd2tool.com/wp-content/uploads/2017/07/5/15-5.jpg

http://forobd2tool.com/wp-content/uploads/2017/07/5/15-6.jpg
Then, it will ask you to “Insert an adding key and turn ignition on”, so insert the new Toyota G chip key and press Enter button.

http://forobd2tool.com/wp-content/uploads/2017/07/5/15-7.jpg

Now just wait the immobilizer light go off for about one minute. After the IMMO light is off, the new key is programmed successfully!

http://forobd2tool.com/wp-content/uploads/2017/07/5/15-8.jpg

How SKP900 Key Programmer program Toyota H chip key?

The procedure is same as OBD2 key programmer SKP-900 programming G chip key. You can follow G chip key programming to add Toyota H chip key.