Diagnose Nissan 2007 x-trail 2.0 dci with Consult III or Multidiag Actia J2534

  • -

Diagnose Nissan 2007 x-trail 2.0 dci with Consult III or Multidiag Actia J2534

Car model and year: Nissan 2007 x-trail 2.0 dci

Nissan-2007-x-trail

Purpose:

I especially try to diagnose effectively, clear the defects, possibly handle this damn Fap ….
I am looking for a tool do, for example, resets after “organ” change like egr valves on Nissan. Is it able to perform tests?

Tool to consider:

Multidiag Actia J2534

Consult-3 Plus could see on www.obd2tool.com

Advice: if you just want to make an xtrail take the consult III.

Comes one question: on this OBD2TOOL site, we find two interfaces consult one at €118 and the other $225 without I can distinguish the differences in features. Is there a big difference between the two?

Fact:

yes it will be much more effective on Nissan than a multi-brand!
already between the one at €118 and €225 there is a difference is that the most expensive has Bluetooth and not the other. the most expensive comes with a suitcase the other is a carton, after there may be the quality of the components used which is different!
but otherwise the 2 will do the same thing except that the $118 has to be connected to the pc by a USB cord

So, you are supposed to go to one of these two interfaces Nissan consult III.


  • -

How to Reset 2012 Reset Nissan Murano CVT Fluid Count with Nissan Consult 3?

Vehicle model: Nissan Murano Z51 3.5L CVT 2012Y

Purpose: reset CVT fluid “life” monitor

 

Device used:

You need a professional scan tool to reset the CVT transmission fluid count.  The normal code readers will not work.

Nissan Consult III, Nissan Consult III Plus, Launch x431 V and an Autel ms908p scanner, all of these will do the reset.

 

Procedure for using Nissan Consult III diagnostic tool:

If you are using a clone, Consult 3 plus is better choice.

This procedure is preferably carried out after changing the oil in the CVT .

 

Launch Starter in which we select Consult-III :

图片1

Press the Connect button :

图片2

Choose vehicle model Murano Z51 after 2010.v. and press the Select button :

图片3

Confirm the selection with the Confirm button :

图片4

Choose Diagnosis :

图片5

Select the type of Can- bus according to the configuration, in this case, the very first, and click the Next button :

图片6

Click on the tablet (top left):

图片7

Choose System Diagnosis :

图片8

Click on Transmission and OK :

图片9

Moving towards Work Support :

图片10

Click on Conform CVTF Deteriortn and Next :

图片11

At the moment, the fluid counter shows 7897

图片12

Click the Clear button and once again agree:

图片13

Counter reset:

图片14

Reset fluid count success with Nissan Consult 3 scanner.

图片15

Done.