Why Dell D630 is necessary for MB SD Connect C4 Diagnosis

  • -

Why Dell D630 is necessary for MB SD Connect C4 Diagnosis

Nowadays, MB SD Connect Compact 4 Plus Dell D630 is favored by the Mercedes owners.
But there are lots of people puzzled whether it is necessary to buy Dell D630 laptop for MB SD C4.

Recently, we obd2tool.com customer service have searched a great deal of customer feedback from different forum, and here are some of them.
—With the Dell D630’s dedicated serial port, there was no issue for me…. it was plug and play… I just loaded the HDD from the Seller into my Dell and all I needed to do was activate WIS/EPC and XENTRY/DAS with “activation keys”… I only use the Dell for MB Star C4 SD Connect purposes…

bought an older Dell D630 with a serial port and plan on buying MB SD Star C4 directly installed in a Dell D630 hard drive. No Virtual Machine issues.

Star Diagnosis
C3 Star/ C4 actually specifies the computer or tablet used in the SDS environment… The T30 is rather slow but will get the job done.

If your ever in the market for a faster SDS laptop, the Dell 630 with at least 2Ghz and the speed improvement especially when using Xentry is like night and day.

—I advise buy SD Connect 4 which is connected with LAN cable rather than COM-port as Star C3. And pick up Dell 630 laptop if you are new to Mercedes daignosis, because all latest software (current 2015.7V) are pre-installed.
Picture
—the HDD that is pre-loaded with the software for MB SD CONNECT C4 by the Seller, is inserted into the DELL D630… The DELL D630 is the fastest laptop with the RS232 feature.
Picture
— C4 are favorable to get with a pre-installed drive that fits inside a Dell laptop.
Picture


  • -

Mercedes S430 ETC SCN coding with SD Connect C4

This is a customer feedback working SCN coding on Mercedes S430 ETC with MB Star diagnostic SD Connect C4 diagnostic system.

Mercedes model:
Mercedes S430 Elongated (220.170)

Device to use:
Dell laptop D630
MB SD Connect C4

11-0

ETC SCN coding procedure:
Open XENTRY

11-01
Enter user ID and password to log in.

11-1

Communication with control unit EGS2…

11-2

Data are being determined…
The coding is carried out…

11-3

Data are being determined…
Wait 3 seconds…

11-4

Switch ignition off

11-5

Wait 5 seconds…
Switch on ignition
Control module reset, please wait…
CVN The value is calculated internally by the control unit
Wait 100 seconds…

11-6

Data are being determined…
Documentation for repair order WDBNG70J25A457136
The SCN coding sequence has been completed successfully.

11-7

Click YES to close the file without making a printout.
Data are being determined…
Communication with control unit ETC…

11-8

Go to SCN coding

11-9

Select Fault codes

11-10

No fault code present

11-11