Caterpillar SIS Basic Instuction

  • -

Caterpillar SIS Basic Instuction

Contents:

1. What is CAT SIS

2. Hardware – Software Recommendations

3. What’s Required to Run SIS

4. Get Files from Downloads Page5. Install SIS DVD Software6. Starting SIS – Web / DVD / Network

7. How to Start – Product Identification8. Searching for Information – Parts or Service

9. SIS 2010A – 2D Hot-pointing

10. Printing

What is Service Information System (SIS)

SIS is the electronic service tool that dealers, customers and employees rely on for their parts and service information needs.SIS covers information for all products from 1977 on. The information in SIS is equivalent to over 25,000 books. With over 2 million graphics and more than 1.5 million part numbers, SIS contains 44,000 parts and service documents.
SIS is available on Local Area Networks (LAN) with Network SIS, the Internet (SIS Web), or with a DVD subscription.
Data on cat sis web (internet version) is updated nightly, providing users with the most current data. Connection to the internet is required for this access.SIS covers information for all products from 1977 on.
The information in SIS is equivalent to over 25,000 books. With over 2 million graphics and more than 1.5 million part numbers, SIS contains 44,000 parts and service documents.
SIS is available on Local Area Networks (LAN) with Network SIS, the Internet (SIS Web), or with a DVD subscription.
Data on SIS Web (internet version) is updated nightly, providing users with the most current data. Connection to the internet is required for this access.

SIS Hardware and Software Requirements

Go to:

https://dealer.cat.com/sis

Then go to News and Announcements for the most up to date requirements
Get Files from Downloads Page

What’s Required to Run SIS
cat-sis-web-1

Glossary
Access method: ways to search and look at information
Attachment: attachment on machine; i.e., bucketFeedback: electronic communication back to Caterpillar (available through SIS Web only)
Information Types: Document categoriesNPR: Numerical Parts Record
Parts ID: parts identification
Parts identification page: page showing part as well as consistParts consist: listing of parts, quantities
Systems & Components (Product structure): arrangements, groups, system
Return to Main Menu: click on Model: linkSMCS: Service Management Control SystemSNP: serial number prefix

Get Files from Downloads Pag

cat-sis-web-2

Install SIS DVD Software
Administrative Rights are REQUIRED to install the SOFTWARE SIS Administrator/Service Software Administrator can assist

To install & use SIS DVD software, 4 steps are required
1.Install SIS Software
2.Install SIS DATA Setup CDs (there are now
3.License SIS Software
4.Create/Import SIS User Accounts

Starting SIS Web or DVD or Network
Start SIS Web from the browser
Using a shortcut/bookmark
Address is https://sisweb.cat.com**
Start SIS DVD from the desktop or START menu
Once installed, icon is on desktop and in START menu
Start SIS Network from the desktop or START menu
Once installed, icon is on desktop and in START me

Improved and Simplified SIS Main Menu
cat-sis-web-3
cat-sis-web-4

Preferences
cat-sis-web-5
cat-sis-web-6

NOTE: If this is not visible after making this change, contact Dealer SIS Administrator for access.

Preferences for Parts List
Six options exist for setting Parts Preferences
These options control how parts lists should be handled after processing or e-mailing them
Following slides may differ from your screens based on preferences

cat-sis-web-7

Translated Part Names via SIS Preference Language

By changing the SIS Language interface preference language to other than English: hover text will appear for translated part names when available
Includes all 7 interface languages
Format for print shows both the English and the translated term

cat-sis-web-8

On the parts consist page, if you “mouse over” a part name, you will see the translated name in the language set in your preference.

cat-sis-web-9
Format for print page shows both the English and translated name.
cat-sis-web-10

How to Start Using a Systems & Components (Product Identification)
Searches are divided into those requiring a Product Identification (product ID – prefix and serial number, sometimes referred to as serial number prefix – SNP) and those not requiring a Product ID.

1. Product ID-required searches produce results that are more specific to a product.
2. Prefix only-search results apply to the entire model with that prefix.
3. No-Product ID searches permitted

Model prefixes can be found using the Select Equipment Model search
Some documents require users be given permission to access them. Those are marked with an **.

Don’t know the serial number prefix?
Use the (Find) link

cat-sis-web-11

If you know the Sales Model number, type it in the fill-in box.

cat-sis-web-12

If you don’t know the Sales Model number, select an item from the Product Families displayed in the left column
cat-sis-web-13

Getting Started with Searching
Many access methods used to search for technical information in SIS require a serial number or serial number prefix to be entered before beginning a search.
cat-sis-web-14

Searches from SIS Main Menu
cat-sis-web-16

Information Search Matrix
cat-sis-web-17

Systems & Components (Product Structure)
Systems & Components (Product Structure) refers to systems, groups, and components (e.g., cooling systems, water pumps, and impellers) of products based on the serial number and/or arrangement specified.

Caterpillar Certified Rebuild
cat-sis-web-18


  • -

Auto repair software on obd2tool

Auto Repair shop management obd2tool has been an issue since the demand of the business is increased. The auto repair shops deal with the issues including management, repair parts buying and selling and the billing that is hectic for a single person to manage at one time. It was observed that the business was getting badly affected as there was hardly any check and balance for the sale and purchase in the shop. However, this issue has been resolved by the innovation of Auto Repair Software. These software are performing exceptionally well in the market and are giving much-needed relaxation to the businessmen related to the auto repair shops.

1.  US$99 – ALL Auto repair software
12-1

Auto Repair Software list :
1.2014 for  A L L D A T A 10.53   575GB
2.2015 for M i t c h e l l           165GB
3.Autodata V3.38         1.33GB
4.WorkShop Vivid 10.2    3.25GB
5.ELSA 4.0              45.5GB
6.ROVER               470MB
7.WIS 0911. 3            11.1MB
8.StarFinder_v3. 4         1.75GB
9.Tolerance_data_2_2009    3.55GB
10.for OPEL TIS 2011.3       3.87GB
11.for BMW TIS. 5           3.23GB
12.ATSG2005. 6          3.94GB
13.OnDemand5 Transmission. 6       12GB
14.AAMCO DirecTech. 7            10.7GB
15.ZFAT. 8                        777MB
16.for BMW WDS13.0. 8               1.26GB
17.for VOLVO WDS. 10                16.9GB
18.for BMW KSD1008                  5.75GB
19.for BOSCH ESI. 11                  17.4GB
20.20.NYO4 FULL                109MB
21.for HY ESIS. 12                    592MB
22.for HY EFLASH. 12                 265MB
23.FSMD. 12                      5.16GB
24.TachoSoft21.5                     14.2MB
25.for KIA TIS. 2008                   7.29GB
26.for BENTLEY IETIS. 15              2.77GB
27.GMDW TIS. 15                  436MB
28.ARTIS TECHNIK. 15             1.56GB
29.for NISSAN&INFINITI ESM          6.75GB
30.for GM ESI 0409                    4.15GB
31.for Chevrolet TIS 1102                3.88GB
32.for BMW ETK_08_2013              3.67GB
33. for Mitchell truck                    1.67GB
34.ImmoKiller_V1.10                 12.8MB
35.otocheck immo                     20.3MB
36.Nissan SuperCode                    9.59MB
37.DAS_KEYGEN_FOR_SRS_AC_INSTRUMENTS  192KB
38.xentry developer                  415KB
39.ECM2001 6.3                    25MB
40.IMMOTOOL  V26.12.2007        59.4MB
41.AD100 T300 SBB MVP Incode Outcode Calculator       1.22MB

2.  US$278 – 2014 ALLDATA 10.53 and 2015 Mitchell installed on Dell D630 ready to use

12-2

3.  US$28 – 32MB PCMCIA Memory CARD FOR GM TECH2 Six Software -GM,OPEL,SAAB,ISUZU, SUZUKI Holden
12-3

Works with GM TECH 2, contain the latest software for GM TECH2.It has six kinds of software, SAAB, OPEL, GM, ISUZU, Suzuki and Holden. Customers can choose one type of software to be loaded to this 32MB Card.

4.  US$228 – Cummins INSITE 8.3.0120 Software 8.3.0120 Pro Version No Time Limited

12-4

Software Version: Cummins INSITE 8.3.0120 pro
Operating System: Win7 32 Bit System
Support Multi-Language: English(united states)/ Chinese(simplified)/ Danish/ Dutch/ Finnish/ French/ German/ Italian/ Japanese/ Korean/ Norwegian/ Portuguese/ Russian/ Spanish/ Swedish/ Turkish
Compatible Hardware:
Cummins INLINE 6 Data Link Adapter
Cummins INLINE 5 Data Link Adapter
DPA5 Dearborn Protocol Adapter 5 Heavy Duty Truck Scanner
NEXIQ USB Link
XTruck USB Link
AUGOCOM H8 Truck Diagnostic Tool

5.  US$158 – V18.100 Porsche PIWIS Software Update Package For Porsche Piwis Tester II

12-5

Piwis Tester II for Porsche Functions:
1. Read/clear error code, catch data stream, computer programming match, component test, maintenance information consult, components site drawing, wiring diagram.
2. Porsche Piwis Tester II works with car year after 2005 and latest Porsche cars. It is equipped with the Panasonic laptop and original software for the test. Porsche Piwis Tester II can help you diagnose and program the most new and old kind of Porsche cars. For example: 911(997)(991), Boxster/Cayman, (987), Cayenne up to MY 2010, Cayenne from MY 2011 and Panamera.
3. New Panamera can only be diagnosed by using Porsche Piwis Tester II. Based on current project planning, all earlier vehicle models will gradually be changed over to the new Porsche Piwis Tester II by the end of 2010. Porsche Piwis Tester I must be used for older models in the Porsche workshop until end of 2010.
4. Support for Porsche. Piwis Tester I will no longer be available once the earlier diagnostic programs have been transferred to Porsche Piwis Tester II.
5. When Porsche Piwis Tester II is distributed, it will contain one basic piece of software. This is necessary in order to start and configure the tester.

6.  US$88 – BMW ICOM Latest V2018.09 Software HDD For Win7 System with Engineers Programming

12-6

With free BMW Engineer Software
1. Get engineer version, INPA 5.00,winkfp 5.2.3,NCS 3.5.1, e-sys 3.30.1,data V64.2
2. get Chinese software DR.GINI B020
3. get count code navigation tool software FSC operator code
4. get one-clik hidden brush tool BMWAi V4.6
5. Add DIS Software for Old cars, DISV57 and DISV44,diagnostic and ecu programmer

7.  US$299 – 2018.09V MB SD C4/C5 Super Engineering Software 500G SSD with DTS monaco and Vediamo Support Offline Programming

12-7

Software list:
1. DAS 2018.09: the automatically Diagnosis Assistance System
2. Xentry 2018.09: New software released by Bennz Company after 04/2009 by diagnosis new cars.
3. WIS net 2018.09:Workshop Information System
Supply the whole view of the wiring diagram in a car, component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
4. EPC.net 2018.09:Electronic Parts Catalog
5. ST Finder:Part Location Finder options: 2008 and 2016
6. STARUTILITIES :the movement management system and self-test
7. SD MEDIA 2014
8. PL72: 2018 Mercedes software with PL70
9.Engineer Software:DTS monaco V8.03 And Vediamo V5.01.00 Support Offline Programming
10.HHT Software for old cars

8. US$388 – Caterpillar SIS 2018 CAT SIS 2018

12-8

There are 2 options for you to choose before order please:
1. Software is in a 320G hdd before shipment, the customers need to install it and active it in the laptop by themselves after receive the hdd.
2. Software would be installed well in a second hand dell d630 laptop before shipment, you could use it directly after you receive the dell D630 Laptop.
Languages: English, Spanish, Italian, Chinese, Mexican, German, French
OS: VISTA, Win7 x32, Win7 x64, Windows 8 x32, WinNT, WinXP
Date of update: 1/2018