New Jaguar and Land Rover Diagnostic Tool JLR VCI+JLR DoIP VCI support Pathfinder and SDD software

  • -

New Jaguar and Land Rover Diagnostic Tool JLR VCI+JLR DoIP VCI support Pathfinder and SDD software

VCX-PLUS is a  a new generation of integrated automotive diagnostic equipment.A device can support both Pathfinder and SDD software at the same time. That is, a device can replace the JLR VCI+JLR DoIP VCI combination.It can reduce the cost of maintenance and operation for the users. It can be completely replaced.

Note: We will install Pathfinder and SDD software

1.The Pathfinder software(You must have a online account to work with it,we don’t offer)
It is the only unit that will be compatible with the Pathfinder software and all JLR vehicles with the new vehicle architectures found in 2018 and newer vehicles (from the Range Rover/Range Rover Sport L405/L494). In addition to the 2018 and newer vehicles, the DoIP VCI will also be capable of interfacing with 2014 through 2018 Multi-CAN architecture vehicles (see application list below).
2.The SDD software(If you want to do programming ,you must have a online account)

All 2014-2018 with no DOIP and earlier (2006 to 2014) land rover and Jaguar will still use the SDD JLR software.

The new Land Rover scanner Interface named DOIP.

This new interface would be needed for all 2018 land rover and Jaguar vehicles.

The JLR DoIP VCI is the newest interface for Jaguar and Land Rover vehicles. It is the only unit that will be compatible with the Pathfinder software and all JLR vehicles with the new vehicle architectures found in 2018 and newer vehicles (from the Range Rover/Range Rover Sport L405/L494). In addition to the 2018 and newer vehicles, the DoIP VCI will also be capable of interfacing with 2014 through 2018 Multi-CAN architecture vehicles (see application list below). Vehicles 2014 and older vehicles not detailed here will continue to use the current diagnostic system and VCIs.

DoIP VCI Applications:
· XE (X760)
· F-Pace (X761)
· F-Type (X152)
· XF (X260)
· XJ (X351) – 16MY only
· Evoque (L538)
· Discovery Sport (L550)
· Range Rover (L405)
· Range Rover Sport (L494)

All 2014 and earlier (2006 to 2014) land rover and Jaguar will still use the SDD JLR software for diagnostics and reprogramming.
The mongoose, Bosch and j2534 VCI would be only used with SDD software.
The new DOIP is not compatible with SDD software.

Packing List (1):

1pc x ALLSCANNER VXDIAG Main Unit
1pc x OBD cable
1pc x USB cable
1pc x network cable
1pc  x  HDD

Our HDD can be ued in following laptop:
DELL :5420, D630 , 6420, 6320 5430. 5520 E4300
LENOVO :E49, G400S , B49, T410, T420
Panasonic: CF30,CF52,CF-31,CF-19

Packing List (2):

1pc x ALLSCANNER VXDIAG Main Unit
1pc x OBD cable
1pc x USB cable
1pc x network cable
1pc  x  Second Hand Second Hand Lenovo T410 Laptop I5 CPU 4GB Memory

https://www.obd2tool.com/goods-6977-New-Jaguar-and-Land-Rover-Diagnostic-Tool.html


  • -

Durametric coding Possible with Porsche PIWIS cable

Durametric coding instruction:

The Coding option provides a way to back-up, restore, and change settings within supported control units. For example, you can save the settings of an old control unit you must replace and restore those settings to a new control unit. Durametric relies on internal part numbers and metrics to ensure you do not restore settings to unintended, incompatible control units.

Coding options on supported control units vary.

To backup control unit settings:
1.Select a model.
2.Select a control unit that supports coding.
3.Select Coding.
4.Review the warning statement.
5.If you acknowledge the warning statement, click I understand the risks (proceed with coding).
6.On the Backup / Restore tab, click the Backup button.
The Save As dialog appears. The program uses an XML file to save the backup settings. By default,
the program names the file the same as the selected control unit and saves the file to the My Documents (or Documents) folder.
7.Save the XML. Note the save location and filename for future reference.

porsche-durametric-coding-1

To restore saved control unit settings:
1.Select a model.
2.Select a control unit that supports coding.
3.Select Coding.
4.Review the warning statement.
5.If you acknowledge the warning statement, click I understand the risks (proceed with coding).
6.On the Backup / Restore tab, click the Restore button. The Open dialog appears.
7.Browse to the location of your backup files.
8.Select an applicable backup file.
9.Click the Open button. The program then restores the settings to the control unit.

To edit control unit settings:
1.Select a model.
2.Select a control unit that supports coding.
3.Select Coding.
4.Review the warning statement.
5.If you acknowledge the warning statement, click I understand the risks (proceed with coding).
6.Select the Coding tab. Editable options will appear.
7.Edit the settings as necessary. Settings changes take effect when you move the cursor to another field.

porsche-durametric-coding-2

To do coding with Piwis cable:
Coding is available in the Professional kits or VXDIAG Porsche Piwis III:

porsche-durametric-coding-3

https://www.obd2tool.com/goods-10074-VXDIAG-VCX-DoIP-Porsche-Tester-Piwis-III-with-Lenovo-T440P-Laptop.html

In the Coding/Adaptation function group, it is possible to read the coding of control units and also to change the coding if the user has the corresponding permissions.

porsche-durametric-coding-4
porsche-durametric-coding-5

If you have selected at least one control unit in another function group (A), you can access the list of coding modes (B) by selecting the Coding/Adaptation function group.

You can access the different working screens after selection of a coding mode:

If you have selected manual coding without MCR (C) and confirmed this with <F12> (H), you can now set and write coding values (I). You can return to the list of coding modes with <F11> (G).

If you have selected manual coding with MCR (D) and confirmed this with <F12> (K),you must enter the vehicle data in the screen that is then displayed (L). You can return from here to the list of coding modes with <F11> (J).

When you have entered the vehicle data, you can access a screen for assignment of the valid equipment features by pressing <F12> (N). If you press the <F11> button (M) in this screen, you return to the vehicle data input screen.

After you have assigned the equipment features, you then access a screen where you confirm that the vehicle data is correct by pressing <F12> (O). If you press the <F11> button (P) in the confirmation screen, you return to the screen in which you have to assign the valid equipment features.

If you confirm that the data is correct with <F12> (Q), the codings are then written (R).

If you have selected one of the automatic coding modes (Automatic coding with MCR or Reset to factory settings) and confirmed this with <F12> (T), you must confirm the vehicle data with <F12> (Q) (back to list of coding modes with <F11> (S)). The codings are then written (R).

In addition, you can also call up a different function group by selecting one of the function group buttons in the menu bar (U).