Monthly Archives: January 2020

  • -

Porsche piwis2 14.000 software free download

Piwis Tester II Porsche latest diagnostic software download for free, this is the latest version PIWIS II 14.000 If you need a diagnostic connector VCI, please feel free to contact us

Version 14.000 download:

Version 13.700 download:

Version 13.400 download:

Version 13.150 full version download, can be upgraded from any version of piwis2

12.400 version download (full installation version)

Version 12.100 download

Version 11.700 Download

  • -
iprog pro

Feedback and FAQ of Iprog+ Iprog Pro Programmer

Iprog+ Pro car key programmer,it can also support Airbag,carradio,dpf off, ECU,IMMO KEY, MIL TO KM, PINABS, PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust,EEPROM,MCUAtmel,Fujutsu, Microchip,Motorola, Motorola912EN,NECV850,BLR,CAN,CRC-Cript,ibutton,sd-unlocker,test.Supports vehicles till year 2019.


Iprog+ review 1:  

Isuzu Dmax 2010 all key lost done by Iprog+





Iprog+ review 2:

I ordered one iprog clone, I can cofirm that Iprog+ is working perfect on these keys: to reset a used Smartkey of Subaru Impreza (renew, make virgin), it is a DENSO 14ACA Type.



Iprog+ review 3:

Iprog plus masos for the drop of the car and the car box will be closed dpf egr evap car toyota and Lexus will make the car use the stand.







Iprog+ review 4:

My iprog+ can do good work.

Credits to one DK veteran.



Next is to Iprog+ problems and solutions:

Problem 1:

I have a 2010 GMC terrain , I purchased the car and it has 999999 on the dash board when I scanned it, GDS2 shows me it has 16.7 million miles , my question is I am trying to put the mileage back to original state of 257.000 KM car is Canadian  I am going to be using iprog+  is the info for it in the BCM or the cluster or Both.


BCM should be enough, but if the dash does not display new mileage you may need to do both. 24c16 in dash and BCM.


Problem 2: How to solve iprog clone pin test error?

Q: I bought a iprog+ clone from ebay in last week. but I tried read eeprom in dash, there was a pin test error massage .I try with 93c56,86,and 66 but this error occur.



A: Connect the eeprom adapter only and run the Adapter Test.ipr in menu to check wether the adapter is good or bad.


Q: sir I tested and this massage show and after translate to English….


Power-up test …

Installation: 2.6 V, Real: 1.3 V (1.3) Error 10B = 0.9 Error

Installation: 2.8 V, Real: 1.3 V (1.5) Error 10B = 0.9 Error

Installation: 2.9 V, Real: 1.3 V. (1.6) Error 10B = 0.9 Error

Installation: 3.1 V, Real: 1.3 V (1.8) Error 10B = 0.9 Error

Installation: 3.4 V, Real: 1.3 V (2.1) Error 10B = 0.9 Error

Installation: 3.8 V, Really: 1.4 V. (2.4) Error 10B = 0.9 Error

Installation: 4.3 V, Really: 1.4 V. (2.9) Error 10B = 0.9 Error

Installation: 5.0 V, Really: 1.5 V. (3.5) Error 10B = 1.0 Error

!!!!!!!! Overload on power supply, the test is terminated.



The eprom adapter can be repaired.

The diagram can help you.


To be continued…