Eeprom AT93C56 readwrite using Lonsdor K518ISE + Kprog 2

Lonsdor K518ISE or K518S key programmer connecting the Kprog2 to be able to flash an eprom soic chip AT93C56.

Steps:
step 1: read eeprom data
step 2: edit data in hex editor
step 3: write data
step 4: read data again
step 5: check data in hex editor

in detail…
step 1: read eeprom data
eeprom connection to Kprog is done and ready for reading data using Lonsor k518ise

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-1

settings – adpater – eeprom – common – 93CXXX – read data

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-2
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-3Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-4Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-5

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-6

plug external 12v power supply and connect KPROG adapter to the 15-pin adapter on themainline

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-7   Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-8

select chip type:

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-9

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-10
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-11
here, select AT93C56-16bit

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-12 Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-13

then save the bin file, name it as WE3.bin

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-14

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-15

finished reading eeprom

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-16

step 2: edit data in hex editor

back to the hex editor under adapter

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-17

then hex editor, hex editor

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-18

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-19

open file – folder: file – folder: feature_29 – WE3.bin

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-20 Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-21
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-22
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-23

edit data

change 00 into 88
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-24
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-25
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-26

save data

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-27

step 3: write data

back to eeprom – common – 39cxxx – write data

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-28
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-29

pls plug external 12v power supply and connect the kprog adapter to the 15-pin connector on the mainline

select chip type: at93c56-16bit

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-30
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-26
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-27
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-28
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-29

Lonsdor k518ise managed to write eeprom!

step 4: read data again

back to read data under 93cxxx

pls plug external 12v power supply and connect the kprog adapter to the 15-pin connector on the mainline

select chip type: at93c56-16bit

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-30

save data. file name: WE4.bin

Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-36
lonsdor read eeprom successfully!
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-37

step 5: check data in hex editor
back to hex editor – hex editor – hex editor
open file: folder “file” – folder “feature_29” – WE4.bin
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-38
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-39
Lonsdor-K518ISE-KPROG2-Adapter-reed-eeprom-40

job’s done!