How to use, Update SKP 1000 Key Programmer Manual Tokens

SKP1000 key programmer in US:

1-1

SKP 1000 key programmer price: $479
SKP–1000 tokens: unknown
SKP 1000 update:
SKP 1000 software: updatable
SKP 1000 hardware: updatable

This is how to update SKP1000 hardware:
Take out the TF card and insert it into the card reader
plug into the computer USB port
go to My Computer/local disk (H:)
“Format” disk H:
Tip: Tick on the “Quick format” and click on“Start”
format completes
go to the official site to download the update file
then copy and paste the file into the TF card
plug the TF card into the machine
power on the machine to the main interface

1-01

click on “Firmware update”

1-02

choose “System firmware update”, press “Yes”

1-03
Update successfully

1-04

Press “No” to back.

1-05
go to ” Adapter firmware update”
after finish, reboot the machine for use

1-06

Done.

SKP 1000 car list:
BAIC, BENZ, BESTURN, BMW, BRILLIANE, BYD, CHANGAN, CHANGHE, CHERY, CHRYSLER(CHRYSLER/DODGE/JEEP), DFFENGSHEN, DFPV, FAW, FIAT,
FORD/LINCOLN, GEELY/HUAPU/SQYL,GM(BUICK/CADILLAC/CHEVROLET/GMC/HUMMER),
GREATWALL, HAFEI, HAWTAI, HIMIKO, HNMAZDA, HONDA/ACURA, HONGQI, HYUNDAI, ISUZU, JAC, JAGUAR, KIA, LANDROVER, LIEBAO, LIFAN, LUFENG, LUXGEN, MASERATI, MAZDA, MITSUBISHI, NISSAN/INFINITI, OPEL, PEUGEOT/CITROEN, PORSCHE, PROTON, QQROS, RENAULT, ROEWE/MG, SGMW, SMART, SSANGYONG, SUBARU, SUZUKI, TJFAW, TOYOTA/LEXUS, VW/AUDI/SKODA/SEAT, YOUNGLOTUS, ZZMAZDA, ZZNISSAN, ZOTYE

Lonsdor SKP 1000 vs. SuperOBD SKP 900:
2017 Lonsdor SKP 1000 price: $479
SuperOBD SKP 900 price: $379

SKP-1000 wins in abilities!!!
->SKP900 key programmer supports auto key programming ONLY!
->SKP1000 key programmer supports auto key programming + special functions!

SKP 1000 wins in immobilizer!!!
->Clear key memory;
->Program keys, proximity keys, smart key, flip keys;
->Program after-market and OEM keys;
->Read keys from immobilizer memory;
(Read immo pin code)
->New mechanical key number programming;
->Vehicle identification key programming;
->Reset ECU & immobilizer;

SKP 1000 wins in special functions!!!
->OBD mileage adjustment
->remote controller
->oil/service reset
->throttle body adjustment
->EPB
->pin code calculation
->EEPROM chip read
->immobilizer initialization
->EEPROM/PIC adapter
->personalized settings

SKP1000 wins in operation!!
->used with a stylus pen/ digital pen to input commands to a screen
->much easier & faster when using

2017 SKP1000 wins in update!!
-> firmware updatable (not only software)
-> software update available now and in future

2017 SKP1000 wins in future cars!!
->SKP1000 will be compatibility for future cars
->SKP900 stopped production and never works for new models

SKP1000 wins in connection!
->has USB2.0
->has a better TF card with a reader

SKP1000 wins in package list!
->has a Haima 7pin adapter
->has a power adapter
->has a stylus pen
->has a TF card with a reader

SKP 1000 key programmer how to use:

Sample 1: Auto Key Programmer SKP1000 key programmer program a smart key to Hyundai SONATA 8
connect the main cable to the SKP 1000 machine
plug the OBDII adapter to the car
power on the SKP1000 machine, until you see the LOGO
press [YES] to the main menu
choose “Immobilizer”

1-2

go to the SKP1000 car list
choose a model: Hyundai, press “Confirm”

1-3

choose “Smart card”, press “Yes”

1--1

choose ” by car model”, press “Yes”

1--2

choose “SONATA 8 (with card slot), press “Yes”

1--3

choose “Smart card (with card slot), press “Yes”

1--4
follow the prompt on the screen to turn off ignition, press “Yes”

1--5

open the door and close for one time, press “Yes”

1--6

choose smart card to match, press “Yes”

1--7
insert the smart card into the slot, and you can hear alarm sound, turn off the ignition, press “Yes”

1--8
input the password

1--9
check if the password is correct, press “Yes” to confirm

1--10
program the first smart card successfully
press “Yes” to program the next one
press “No” to complete key programming

1--11

1--12

Done!

Sample 2: SKP1000 key programmer from OBD2TOOL Read Fiat Siena ISO code & Program ID48 Special Key via OBD
Step 1: SKP 1000 Read ECU ISO code (security pin code)
Select car brand: Fiat

1.2

Select read iso code

1.3
Select Electronic immobilizer system

1.4
Select read iso code

1.1
After read ecu iso code success, disconnect the battery.
If read iso code failed,please disconnect the battery and try again
(Anyway, disconnect the battery)

1.6

SKP-1000 read Fiat info and fiat iso code
Press YES to continue

1.7

Check if you have a working key
If yes, Press YES button to continue

1.8

Turn ignition to ON position

1.9

Turn ignition to OFF position

1.10

Turn Ignition ON
1.11

Read iso code success

1.12

manually enter 5-digit iso code

1.13

SKP1000 will read the immo data, please write download the numbers (will be used to generate chip)
Step 2. SKP 1000 Generate Fiat special ID48 chip

1.14

Select Fiat common chip to generate special chip

1.15
select generate Fiat ID48 special dealer key

Insert the immo adapter into the SKP1000 car key programmer, select Special function and select Generate Fiat chip

1.16

Insert the blank ID48 chip into the coil of the adapter

1.17
Manually enter 24-digit immo code (read previously)

1.18

Enter 24-digit code marked red

1.19

confirm the entered digits
Step 3: SK10900 Program chip key

1.20

select Program key

1.21
Select Siena key programming,
SKP1000 will also program key to Fiat 500, Boyue, Palio, Leap, viaggio and Perla
1.22

Select Electronic immobilizer system

1.23
Select OBDII connector
turn ignition to ON position

1.24
select Program key

1.25

Key without programming cannot be used

Press YES to continue

1.26

enter 5 digits iso code
confirm

1.27
continue to program more keys

Press YES to continue

1.28
please change next key

1.29
If the dashboard indicator goes off, program success.
Disconnect SKP 1000 and test the new key.

SKP 1000 review: will be released here