T300 VS SBB VS MVP VS ZED BULL

  • -

T300 VS SBB VS MVP VS ZED BULL

T300 Key programmer and MVP tends to do Euro and America cars.
If you want to do ford or toyota cars,it is better to choose SBB key programmer.
T300 and MVP can do car from 1996-2008,can not do many new car as SBB V33.
T300 Can work with the Chrysler 138 Adapter to do Chrysler.

t300 key programmer

SBB programm keys very easily, but if you want to copy keys easily and quickly, you can choose Zed Bull.
This one does not need to connect with cars. You can use the chips to copy keys.
SBB Can copy the new blank key and read pin code.
SBB is the best choice for the 2010 Ford and Hummer.Can not do Chrysler.

SBB key programmer

If you are new to the industry or simply looking for a cost effective way to offer a key programming service to your customers, then the Key Pro M8 Auto Key Programmer provides the solution. The portable Key Pro M8 Auto Key Programmer is the ideal programming tool that programs keys and remotes for all makes of vehicles worldwide – on a ‘Pay As You Go’ basis.

MVP KEY PROGRAMMER

Zedbull can read the pin code of the Hyundai and Kia
Zedbull supports 8C and 8E chips distinguish function
Zedbull can fulfill all of your requirements as professional on Immobilizer Systems.

 


  • -

Program MG Rover Key with T300 auto key programmer

T300/T300+ Key programmer is classic universal auto key programmer for locksmith. T300 supports pin code reading for certain vehicles, program EKA, program fresh key and basic diagnostic functions (clear DTCs, display live data etc). Here is the step-by-step guide of programming MG Rover key with T300 key pro.

Tool needed:
T300 key programmer (V2014.06 T300+ English black case version or V2014.02 T300+ English Blue case version)
OBD2 cable for T300 key coder
ADC145 Adapter for self test
OBDII to 5AS cable (4 wires)
Spare Key fob with battery replaced

t300 key programmer

Time:
Less than 10 minutes

Vehicle maker:
MG Rover

Instruction:

You will need a 5As connector well connected with T300 key programmer. Then connect the T300 key coder with vehicle via OBD port using an OBD2 cable

T300 KEY PROGRAMMER

Start to program the key into the car’s ECUs
Turn ignition to ON position
Power on the T300 auto key pro
Select “Remote functions” option from vehicle selection program

t300 key programmer

Then the T300 diagnostic scanner will identify the Alarm ECU type, for example: Lucas 5AS

T300 key programmer

Select “Special Functions” from “Diagnostic Menu” program

t300 key programmer

Select “Program Remote” function option

t300 key programmer

The T300 will display “Tokens you have remaining” prompt, press Enter key

t300 key programmer

Accept “ONE TOKEN WILL BE USED” message

Follow the system notice and press return.
Hold both functioning new and old key fobs in your hand. Press either the lock or unlock buttons 8 times according to the supplied manual. Or keep pressing until the “beeps” horn to tell you that the fob has been accepted by the system

t300 key programmer

Then straight after that, repeat again with all the other fobs (apparently a maximum of 4).
Press “Enter” key when you’ve completed the procedure.
The next screen will tell you how many tokens you have left.
Continue to program another flash key or exit the t300 auto key programmer.