How SKP900 Key Programmer add Toyota G chip and H chip key

  • -

How SKP900 Key Programmer add Toyota G chip and H chip key

This blog is going to show you how to use SuperOBD SKP900 Key Programmer program Toyota G chip key and Toyota H chip key. This guide is tested on 2015 Toyota Sequoia (G chip) and 2014 Toyota Corolla (H chip). Hope it helps you!

How SKP-900 Key Programmer program Toyota G chip key?

12-1

First, start key programming tool SKP900 and select “Immobilizer” function

12-2

Choose “Toyota” then “Immobilizer 2”

12-3

It will show “Choose OBD2 adapter OBD2TOOL, turn ignition on”, then turn ignition on with the original key. Press Enter button and wait for it is communicating.

12-4

Next, select “Add Key” then it will show “Insert the registered key and turn ignition on”, press the Enter button to continue.

12-5

12-6

Then, it will ask you to “Insert an adding key and turn ignition on”, so insert the new Toyota G chip key and press Enter button.

12-7

Now just wait the immobilizer light go off for about one minute. After the IMMO light is off, the new key is programmed successfully!

12-8


  • -
SKP1000-5

Tips of SKP1000 program 2013 Maserati Gran Turismo smart key

Used SKP1000 programmer to program 2013 Maserati Gran Turismo smart key, at first the new key can start the car but the remote fail to open the door.

Finally, I found the reason and it worked great.

It’s not a long story, hope it helps.

Go on with the above-mentioned problem, after that I tried to enter “Remote System”, tap “Maserati” but received prompt “Connection fail”.

Screenshots helps a lot to understand what I say.

SKP1000-1-

SKP1000-2 SKP1000-3 SKP1000-4 SKP1000-5 SKP1000-6

With a new key to turn.

SKP1000-7

I didn’t believe it’s true, then I tried one more time, this time I did Key Programm Tool, the remote works fine.

Tip for sharing: After complete programming key, do not wait for some time but immediately complete remote, then the remote will open the door successfully.