Porsche PIWIS TESTER II

  • -

Porsche PIWIS TESTER II

1-1
The new Panamera can only be diagnosed by using this Porsche Piwis Tester 2. Based on current project planning, all earlier vehicle models will gradually be changed over to the new PIWIS Tester-II by the end of 2010. PIWIS Tester-I must be used for older models in the Porsche workshop until end of 2010.

Support for Professional Diagnostic Tool PIWIS Tester-I will no longer be available once the earlier diagnostic programs have been transferred to PIWIS Tester-II.

1-2
Coverage all Porsche vehicle with OBD (Panamera & New Cayenne),PIWIS II on www.obd2tool.com main functions General ECU diagnostics (DTC read/clear) Guided fault finding ECU programming/coding Real-time control parameters display Electrical schematics mapping.

1-3

Feature
General ECU diagnostics (DTC read/clear)
Guided fault finding
ECU programming/coding
Real-time control parameters display
Electrical schematics mapping

PACKAGE
Package
Pansonic CF-31 latpop
Porsche PIWIS Tester-II VCI
USB Cable

1-4
OBD-II Cable


  • -

Program Panamera key with Porsche PIWS2 Tester

Equipment:

Porsche PIWS2 Tester2/ PT2 OBDⅡdiagnostic scanner
Panasonic CF30 laptop

Target:
Programming Porsche Panamera key

Instruction:
Install software
Connect PIWS2 tester diagnostic system with car via OBD port
Power up PIWS2 device from Obd2tool.com
Select DIAGNOTISCS in the main menu
Select Panamera

11-1

The system will detect DTC errors, click Yes to confirm and reset them. Press F12 to continue.

11-2

Back to the main function menu. Select DIAGNOTSICS-> Online Teaching Functions-> Engine immobilizer

11-3

Again select vehicle model: Panamera->Panamera V6/S (V8)/GTS (V8)/Turbo (V8)

11-4

Pay attention to the system notice and press F12 to continue.

11-5
Insert the key in the ignition lock now
Switch ignition to ON position
Adapt VIN if necessary and enter the order number. The VIN cannot be more than 17characters long. Press F12 to continue.

11-6

Enter the Network account data: User name and Password. Press F12 to continue.

11-7

Login in progress
The system will display the results for control units
The system continue reading data from the control units
Displaying the results for control units
Teach the key, continue with F12, cancel with F11. Make sure key is inserted and is turned to the ignition position
Enter the number of keys that will be programmed, press F12 to continue.
11-8

Keys can be taught, prepare it.
NOTE: No old keys maybe used with a new lock set (new identify!) Otherwise, the lock set will be made unusable.
Remove the currently inserted key. Insert all the keys, one after the other. Leave the last key in the ignition lock.
Follow the system prompts
Switch on the ignition
The system will display the key programmed/taught result that read from the control unit immobilizer.

11-9

Exit the Porsche Piwis 2 program.