OBDSTAR 300MOBDSTAR X300M Odometer Adjustment Right Error for 10KM

  • -

OBDSTAR 300MOBDSTAR X300M Odometer Adjustment Right Error for 10KM

OBDSTAR X300M Odometer Adjustment Right Error for 10KM

http://forobd2tool.com/wp-content/uploads/2017/07/1/16-1.jpg

Customer feedback for when they use OBDSTAR X300M adjust the mileage, and yes,it is ture, but it is in the acceptable range.

It have the related error, such as,

the real mileage for his car is 2000KM, but the device connect and read the  33113KM, this is a big mistake,

what should i do?

Tech advice:

1.X300M Odometer Adjustment have 10KM mistake when read for your car, if expand for this, you should reset the device and power on again

2.Then input the mileage you want, it will be ok.


  • -

How to use OBDSTAR X300M to change mileage on Audi Q5 2010

Received OBDSTAR X300M package for a few days and discussed a lot about it on forums. Sounds an interesting topic. Here share something what i did on this obdstar x300M for OBDII unit yesterday.

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-0.jpg

I used X300M for my Audi Q5 2010 to change km. Very easy; all i did was to follow the screen instruction only.

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-1.jpg

The km before change: 22850km

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-2.jpg

And this is the item for mileage adjustment; it‘s OBDSTAR Scanner obdstar x300m

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-3.jpg

Connect X300m to the OBD port on Q5

Then, follow to screen

Select the models:

VEHICLES->MILEAGE ADJUSTMENT->AUDI/VW/SKODA/SEAT

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-4.jpg

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-5.jpg

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-6.jpg

Select software AUDI/VW/SKODA/SEAT V31.11 for ready use:

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-7.jpg

Loading software …

Initializing…

Authorizing…

Select AUDI A5 2010

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-8.jpg
http://forobd2tool.com/wp-content/uploads/2017/07/1/11-9.jpg
http://forobd2tool.com/wp-content/uploads/2017/07/1/11-10.jpg

Then go to MILEAGE ADJUSTMENT

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-11.jpg

The X300M first read the original km (my Q5: 22850km) after communication

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-12.jpg

Next, to setup the new mileage; i input 105312

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-13.jpg

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-14.jpg

X300m change km by itself (about 10-25 min)

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-15.jpg

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-16.jpg

The dash also displays the same mileage.

http://forobd2tool.com/wp-content/uploads/2017/07/1/11-17.jpg

So, it’s successful.