KESSV2 5.017 &KTAG 7.020

  • -

KESSV2 5.017 &KTAG 7.020

KESS V2 is a ECU programming tool that is perfect for OBD use,while KTag is perfect for Jtag, BDM and all the Boot application (tricore and ST10).

With KESS V2 you programming directly through the OBD port of the vehicle, while with Ktag you need to take apart the ECU and open it, after you can make the read/write operation.

Many ECU has the advantage that can be read and write from OBD port (so KESS V2 is perfect), but there are lot ECU that need to disassemble from the car and open and this is the case for all the ECU that need to be programmed with Jtag, BDM and Boot protocols, so KTAG is needed.

 

KTAG firmware 7.020:

Works better, faster and more stable than old versions

1.Adds 100+ ECU types & supports new car models e.g. Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276 ECU, Toyota 76F, etc.

2.More languages available:English, Italian, Portuguese, French, Deutsch, Spanish)

3.Better wiring description (in words not pictures).

 

KESS V2 firmware 5.017:

Compared to KESS V4.036, the KESS 5.017 has been improved a lot:

  1. 100% working
  2. No tokens limited
  3. With original database
  4. Windows 7 & Windows 8supporting, not only Windows XP
  5. Supports more cars & bikes & trucks unlimited tokens, fully activated

So, with Ktag v7.020 + Kess V2 v5.017, you can read and write ECU without token limitation for OBD, Jtag, BDM and Boot use for the new models and protocols.

 

KESS V2 V5.017 Software Display:

图片1

图片2

图片3

图片4

图片5

图片6

图片7

图片8

图片9

图片10

 

K-TAG 7.020 Software Display:

图片11

图片12

图片13


  • -

Kess v2 fw v4.036 Add Tokens Manual

This is a user manual of how to add tokens to KESS V2 Firmware V4.036; also with how to fix “NO VALID TOKEN FILE” error when fail to add tokens.

NOTES:

1- this manual is used for Kess v2 tuning kit firmware v4.036

2- must be used for Kess v2 without a token reset button

21-1

3- Disable all local area connection and wireless network connection, otherwise the KESS V2 hardware would be damaged.
Process of adding tokens:
Extract “Tool” Zip File;
Copy all the files under “Tool” Folder to the desktop;
Copy “K-Suite_tokens” zip File into Local Dick C and unzip the file;
Run “K10033818 K2-TR ECU TUNERS”;
Click “OK” to continue;

21-2

Browse the folder to C:\\KSuite tokens\KSuite;
Click OK;

21-3
Click “Rest Token Count” button;

21-4

Click OK and then wait for loading;
Next close the window;
Delete previously unzipped “K-Suite_tokens” Folder in C:\\;
Re-extract “K-Suite_tokens” Zip File again;
Re-name “Token1.tok” on the desktop as “Token2.tok”;
Copy “Token2.tok” to the “Tokens” Folder;

21-5

Open “K10033818 K2-TR ECU TUNERS” again;
Select location as C:\KSuite tokens\KSuite again;
Click “Rest Token Count”;
Wait until the KESS V2 main menu window displays;
21-6

kess v2 v4.036 adds tokens SUCCESS!

How to solve “Add Tokens Failed:NO VALID TOKEN FILE”

Tokens for Kess v2 Chip Tuning Tool is used out. Open the file “K10033818” and meet the following situation.

ECU-Tuner error: NO VALID TOKEN FILE

21-7

21-8
solution:
1. rename the token file(“token1.tok”) as “token3.tok” or “token5.tok”

21-9

2.copy the file you renamed just (“token3.tok” or “token5.tok” ) now to the folder “Tokens”Ksuite-3

21-10

note: make sure that there is only one file (“token3.tok” or “token5.tok” ) in the folder “Token”

21-11

normally, the first 10 tokens in “token1.tok” “token2.tok” will be used, you may use tokens from 11th token to the 100th.
it is limited to 100 tokens. so when you use all 100 tokens, you can change the laptop or restore the system and then use tokens from 11th token.

if you follow the 2 steps above but it doesn’t work, please try to install our windows XP

4. If you cannot add tokens according to the instruction above, change the TF card and follow step 1 & 2.