Get MB Star SD C3C4C5 and Laptop Full Package

Why did I choose the MB STAR C3

There is two parts to using the Mercedes Star Diagnostic tool, the first being the setup and the latter actually using it. As you can see above, their are a few leads involved to connect the Mercedes to the star machine.

Why did I choose the Mb Star C3?

Owning 4 Mercedes and many others in the family, fault codes are very common and are difficult to uncover unless you own a Star Machine. The MB Star C3 can interact with cars from 1989 to now, which covers the majority of the cars I own. The ability to read troublesome stored codes and erase them once resolved is very useful and also saves money in the long run with the majority of independent garages charging ￡30-40 to scan your Mercedes.

How Hard is it to use the Mercedes Star Machine?

There is two parts to using the Mercedes Star Diagnostic tool, the first being the setup and the latter actually using it. As you can see above, their are a few leads involved to connect the Mercedes to the star machine.

*   Wire from ECU to the Multiplexor
*   Wire from Multiplexor to the Computer
*   Power Cable to the Laptop (It’s advised never to let the computer run out during diagnostics!)
*   Power pack if low battery that might die during the test

Once the wires have been connected up properly, start the iginition and you should wait until you see a lock appear in the bottom right corner of your computer (near internet signal). Once the lock is present, the computer is connected to the car, therefore start up the DAS/Xentury software and do the following:
*   Find your car using the menu provided (Car -> E Class -> W210 etc)
*   You will then be greeted with a popup notifying that the multiplexor is attempting to connect
*   Once connected, its fairly straight forward – You can perform tests or go into individual units
*   Using F1, F2 and F3, you will be able to navigate through stored fault codes and removing them with the F9 key
*   If faults are not removing, its best to print out the full test (button bottom right), which will contain unique MB Codes to show a mechanic

The Star machine enables you to find a problem, fix it and confirm that it is fixed by erasing the issue and then running another test. If you are feeling confident, you may feel like running some more complex tests i.e. Compression test. I had issues with the fuel injectors in my 320 CDi, therefore I performed a compression test, which was spot on but the second test was the “leak” test, which showed two injectors were faulty.

Buy Mercedes Star Diagnostic Computer Tool

The complete kit can be bought from just ￡600, which includes all of the wires for the latest Mercedes Benz’s out and include the computer with necessary equipment. Of course, the price seems a lot, but so does paying ￡40 each time to have a diagnostic via an independent garage. You are able to do this yourself with limited knowledge aswell as charge friend to clear their faults. You can buy the Mercedes Star Machine Bundle straight from OBD2TOOL.

Just because a star machine is marketed as the “go to” Mercedes error code scanner, it does not mean you cannot use any other type of scanner.