How to Add Audi R8 Transponder with Auro OtoSys IM100/IM600

  • -

How to Add Audi R8 Transponder with Auro OtoSys IM100/IM600

How to: Audi R8 add transponder with precode and remote with Auro OtoSys IM600 (IM100 do the job too).

Audi-R8-Transponder-with-IM600-1

Key type: 8P like Audi A3

Procedure:

Step 1: Read IMMO data

Read and save immo data
Audi-R8-Transponder-with-IM600-2

Step 2: Make Dealer Key

Audi-R8-Transponder-with-IM600-3

Step 3: Learn Key

Step 4: Add Key

Enter from VDO CDC32XX+24C32 A3/TT/R8

Audi-R8-Transponder-with-IM600-4

Audi-R8-Transponder-with-IM600-5

Turn ignition off for 5s and then back to ON. press OK within 2s.

Audi-R8-Transponder-with-IM600-6

Place the dealer key/chip in the IM600 UP400 or IM100 UP200 Key Programmer

Audi-R8-Transponder-with-IM600-7

Audi-R8-Transponder-with-IM600-8

Communicating with the key

During the subseqent communication process, the instument will have a splash screen or a black scree.
This phenomenon is normal.

Audi-R8-Transponder-with-IM600-9

Audi-R8-Transponder-with-IM600-10

Later it will auto reset instrument
Audi-R8-Transponder-with-IM600-11

Add key success.

Audi-R8-Transponder-with-IM600-12

Test the new key.

Done.


  • -

How to Add BMW F30 2012 FEM Spare Key with Auro OtoSys IM100/IM600

How-to: Add spare keys to BMW FEM/BDC F30 diesel year 2012 using Auro OtoSys IM100/IM600 tablet on the bench.

Note: Both IM100/IM600 has BMW FEM/BDC capability. IM600 is capable of BMW CAS4 and Mercedes-Benz key programming, while IM100 does not. If you are interested in IM600, please contact:

Main Steps:

Check key status

Backup EEPROM data

Learn Key

Procedure:

Step 1: Check key status

Disassemble FEM/BDC module

Connect with FEM module, Key Programmer IM100 and UP200 programmer

Select IMMO function->BMW->System selection->FEM/BDC immobilizer

1-1 1-2

Make sure the engine is off

1-3

Check Key Status

1-4

Put the tested key/working key into induction antenna

1-5

Put another keys into induction antenna one by one to check key status. New keys are not locked

Step 2: Backup EEPROM

Back to BMW menu, select Smart Mode

Auro IM100 detect current immobilizer system is FEM/BDC

Reading vehicle information and ecu information

Backing up coding files

Going to modify EEPROM data automatically:
1. Please disassemble the EEPROM chip and connect the programmer
2. The FEM module is chip M9S128 and the BDC module is chip M95256
3. If you operate the EEPROM with clamp, you should turn off the +12V power first!

1-6
Backup EEPROM data automatiocally
Automatically modified EEPROM data successfully
The backup path is /mint/sdcard/scan/UserData/autobackup/
EEPROM chip operated successfully! Please install the chip back to the ECU module

Step 3: Learn Key

1-7

Notice:
The programming is about to start, make sure the supply voltage exceeds 13V and is stable.

1.Please make sure that the vehicle power is ok
2.Please make sute that the OBD diagnostic cable is correctly connected
3. Please make sure that the power icon on the top right corner of the Auro im100 diagnostic tool correctly displays the voltage.

1-8

Programming key in procedure

1-9

Going to restore  EEPROM data automatically:
1. Please disassemble the EEPROM chip and connect the programmer
2. The FEM module is chip M9S128 and the BDC module is chip M95256
3. If you operate the EEPROM with clamp, you should turn off the +12V power first!

Restoring EEPROM data automatically
EEPROM chip operated successfully. Install the chip back to ECU module

1-10

The restoration coding file is about to start

1.Please make sure that the vehicle power is ok
2.Please make sute that the OBD diagnostic cable is correctly connected
3. Please make sure that the power icon on the top right corner of the diagnostic tool
correctly displays the voltage.

Restore coding data files.

1-11

Note:

1.Before the key can be written and cleared, the password must be read out first.
2.Before the key can be written or cleared, the corresponding key position must be selected first.

Do you have a working key? Yes.

Insert working key into emergency start coil, select Read password

1-12

Read password, DME, ISN code success

1-13

Insert a new key into induction coil, select a key position and press Write Key

1-14

Key learning has 4 steps,
The first step of authenticating key information is in progress
The seconds steps if writing data into key is in progress
The third step of resetting ecu is in progress
The fourth step of verifying key information is in progress

1-15

Write key success.

Put the key close to start induction coil, press and hold the ingnition for 10s.
After key learning is completed, the key can be normally used.

1-16

You can program next key with Auro OtoSys IM100 from OBD2TOOL

Notice:
When the number of keys is greater than three, the newly added keys may have no remote control function
due to the imitation of BMW system.