Lonsdor K518ISE Key Programmer is the first tool to read Hyundai / Kia 46/47/8A smart key PIN code via OBD, all key lost included. Here’s the instruction on reading Hyundai 47 smart key pin code and program smart key by OBD using K518ISE.
Step 1: Read Pin Code
Connect K518 host with vehicle via OBD diagnostic socket
Turn ignition ON
Select Immobilizer->Hyundai->Read PIN Code
Select read pin code from 47 Smart Card
Open and close door on the driver side once
Lonsdor K518ISE at OBD2TOOL will display vehicle part number and software version
Read 6-digit pin code success.
Step 2: Program Smart Key
Choose Select from type-> Smart key-> Type 7 (without card slot CAN)-> Program Smart Key
All smart keys need to program, otherwise will not able to start vehicle
Press OK to continue
Turn ignition off. Open and close driver door once
Key Programm Tool Lonsdor K518 requires to enter 6-digit pin code to access
Enter pin code read from Step 1 and confirm.
Prepare keys to program.
Press OK and hold the Start button with key head within 5 sec till immobilizer indicator goes on.
Test the smart key.