SuperOBD SKP900 program 2013 Range Rover Evoque remote key OK

  • -

SuperOBD SKP900 program 2013 Range Rover Evoque remote key OK

This blog will show a tested success case: for 2013 Range Rover Evoque with only one working remote key, you can program new remote key by using SuperOBD SKP-900 Key Programmer about 3 minutes!

http://forobd2tool.com/wp-content/uploads/2017/08/1/27-1.jpg

Below are operating steps:

Connect SKP-900 with car via OBD port then power up SKP-900.

Choose function “IMMOBILIZER”

http://forobd2tool.com/wp-content/uploads/2017/08/1/27-2.jpg

Choose car brand “LAND ROVER”

http://forobd2tool.com/wp-content/uploads/2017/08/1/27-3.jpg

Select year “2012-2013” then “RANGE ROVER (2012-)”

http://forobd2tool.com/wp-content/uploads/2017/08/1/27-4.jpg
Select model “EVOQUE (2012-)”

http://forobd2tool.com/wp-content/uploads/2017/08/1/27-5.jpg

Wait it is loading…

Choose “IMMOBILIZER SYSTEM” and press car start button to turn on ignition.

http://forobd2tool.com/wp-content/uploads/2017/08/1/27-6.jpg

Choose “ADD KEYLESS TYPE 1” it needs at least one registered keyless.

http://forobd2tool.com/wp-content/uploads/2017/08/1/27-7.jpg
Put the registered keyless close to car gear shift then turn ignition off.

Key Programm Tool SKP-900 key programmer will turn car ignition on, press YES button.

http://forobd2tool.com/wp-content/uploads/2017/08/1/27-8.jpg

Now car key number is 3.

http://forobd2tool.com/wp-content/uploads/2017/08/1/27-9.jpg

In 5 seconds quickly press the new key Unlock button.

http://forobd2tool.com/wp-content/uploads/2017/08/1/27-10.jpg

Now car key number detected is 4.

http://forobd2tool.com/wp-content/uploads/2017/08/1/27-11.jpg
Again quickly press the new key Unlock button in 5 seconds.

ADAPT SUCCESS!

http://forobd2tool.com/wp-content/uploads/2017/08/1/27-12.jpg

SuperOBD SKP900 ON OBD2TOOL successfully programs a new key for 2013 Range Rover Evoque! New key is working!

http://forobd2tool.com/wp-content/uploads/2017/08/1/27-13.jpg