Category Archives: ECU programmer

  • -

Ktag firmware 7.026 Reviews

Is Ktag 7.026 better than KTAG V7.020?
Is it worth buying a new tool just for this upgrade?

See how do people think of this?

Discussion at http://mhhauto.com/

1

This 7.026 update is all ready available from EU. “Problem ” is resetting. NXP need replace when time to reset tokens, after 30 writing. That can do few times if have good skills and good OBD II Scanner for this.

2

when you turn 1 job down you will think l should off upgraded , alot more gpt connections on newer ecu,s

3

7.026 is the one with 3 NXP mcu’s . everyone with 30 writings. i use it allow. all working ok and i think by the time i will use all 90 writings a new tool will come.

4

if you need Denso Nec NBD family the only tool doing this 100% is my 7.026. 7.020 will NOT MAKE DENSO NEC NBD even 15%. there may be 1 or 2 of the ecus it can do but that’s it. and no one aside from us can offer you 7.026 as its socketed solution. anyone who tells you 7.020 can make denso nec nbd 100% is just gonna take your money

5

I have ktag 7.026. Tool is OK.
Although it requires a good coffee machine… my reworked ktag 6.070 is MUCH faster

6

Ktag firmware 7.026 have MCU for change

Ktag firmware 7.020 not reset CFG

7

Ktag 7.026 TOKENS 30 in 1 MCU

Ktag 7.020 UNLIMITED

8

This ktag has some nice features like toyota denso or VAG GPT edc17c74

9

some EU seller claims that he has version without tokens limit.

10
Ktag 7.026 Russian clone has fixed firmware with token count stopped.
I use kess and ktag. No any headache. No heating to unlock, no nxp changing.
11
For KESS V2, As i know, for 5+ firmware, protocol files crypted individually for each original.
You can’t update different devices with same files.

Since Kess V2 4.036 a lot of protection added.
For ktag, i think, the same.
Take care before spend 2000+

In summary, there are good and bad reviews of Auto ECU Programmer ktag 7.026. Hint for you, do not rush into new versions. Time will tell you good or not. Before this, go for Ktag firmware 7.020.


  • -

KESS V2 FW 5.017 Ksuite 2.23 WIN XP installation

Here is KESS V2 FW 5.017 Ksuite 2.23 WIN XP installation guide.

Note:KESS V2 Firmware 5.017 has no token limited.

 

(4 Steps) How to install KESS V2 FW 5.017 Ksuite 2.23 on Windows XP?

Before installation, remember to disconnect all Internet work!

Step 1

Open KSuite 2.23 (E:) and run “ksuite_222_v2” exe.

1

2

To complete the setup, click “Next”, “Next” then “Install”.

3

Step 2

It will pop up a Microsoft Visual C++ 2005 License Terms, click “Yes” to continue.

4

Select language as “U.S English”.

5

Click “Next” until “Finish” to complete Auto ECU Programmer Ksuite 2.22 setup wizard.

6

And choose “English”.

7

Step 3

Back to KSuite 2.23 (E:) and open “Ksuite 2.23” folder.

Right click the “K-Suite” shortcut on desktop to choose “K-Suite Properties”.

8

Delete all files in “KSuite” folder.

9

Then copy all files in “Ksuite 2.23” folder to “KSuite” folder.

Step 4

Now it will pop up a Found New Hardware Wizard.

Click “Next” then “Finish”.

10

After that the USB Device is exist. (You can right click “My Computer”→ “Manage”→ “Device Manager”)

11

Open K-Suite shortcut and now it’s Ksuite 2.23 software!

12

Click “Info” button and check the firmware version is 5.017.

Now installation is complete, you can use this new KESS V2 FW 5.017 ECU programmer!

13